Why Airwell Air Conditioner does not respond to remote control?
If your Airwell Air Conditioner isn't responding to the remote control, the remote control message may not be reaching the indoor unit. First, check the remote control batteries. If the batteries are fine, inspect the display and display wiring. If everything seems okay, replace the display PCB. If the issue persists, replace the controller.
Why Airwell GC 18 has no cooling or no heating?
If your Airwell Air Conditioner is running, but there's no cooling or heating, it might be due to a refrigerant leak. Check the refrigeration system.
What to do if Airwell Air Conditioner indoor unit is leaking water?
If your Airwell Air Conditioner is leaking water from the indoor unit, it's likely that the drainage tube is blocked. Inspect the drainage tube and clear any blockages.
Why is Airwell GC 18 compressor motor generating noise and no suction occurs?
If your Airwell Air Conditioner compressor is making noise but not generating suction, the phase order to the compressor might be incorrect. Check the compressor phase order.
Why Airwell GC 18 Air Conditioner works in wrong mode?
If your Airwell Air Conditioner is operating in the wrong mode (e.g., cooling instead of heating), the issue could be related to electronics or the power connection to the RV. Check the RV power connections. If those are okay, test the RV operation with a direct 230VAC power supply. If it still fails, replace the outdoor controller.
What to do if Airwell Air Conditioner compressor stops during operation?
If your Airwell Air Conditioner compressor stops during operation but the Green LED remains on, the issue could stem from an electronic control or power supply problem. It's recommended to perform diagnostics and follow the actions described.
Why Airwell GC 18 Air Conditioner compressor is over heated?
If your Airwell Air Conditioner compressor is overheating and the unit isn't generating capacity, there may be an issue with the EEV. You should check the EEV.
Why Airwell GC 18 Air Conditioner indoor fan works when unit is OFF?
If your Airwell Air Conditioner indoor fan works when the unit is OFF, and the fan speed cannot be adjusted with the remote, it indicates a PCB problem. Replace the controller.
Why Airwell GC 18 Air Conditioner operates with wrong fan speeds?
If your Airwell Air Conditioner is operating with the wrong fan speeds or frequency, it is likely due to incorrect jumper settings. Perform diagnostics and verify if the unit is operating according to EEPROM parameters.
What to do if Airwell Air Conditioner compressor does not start?
If your Airwell Air Conditioner compressor does not start, it could be due to an electronics control problem or protection issue. Perform diagnostics and follow the actions described.
General| Brand | Airwell |
|---|---|
| Model | GC 18 |
| Category | Air Conditioner |
| Language | English |
Lists key technological innovations and benefits of the FLO DCI series.
Details features and types of indoor units.
Provides detailed specifications for the FLO 18 DCI model.
Provides detailed specifications for the FLO 21 DCI model.
Provides detailed specifications for the FLO 24 DCI model.
Provides detailed specifications for the FLO 30 DCI model.
Defines the operational temperature and voltage limits.
Details cooling and heating performance data.
Details cooling and heating performance data.
Details cooling and heating performance data.
Details cooling and heating performance data.
Presents sound pressure level data and spectra.
Provides electrical specifications for single-phase units.
Shows wiring diagram for indoor units.
Shows wiring diagram for outdoor units.
Shows wiring diagrams for FLO 24 DCI.
Shows refrigeration circuits for heat pump models.
Illustrates electrical connections for these models.
Details how compressor frequency is managed.
Lists and explains system protections.
Provides fault diagnosis and corrective actions.
Provides fault diagnosis and corrective actions.
Specific indoor unit fault diagnosis.
Exploded view and parts list for these models.
Exploded view and parts list for GC 18.
Exploded view and parts list for GC 24 Z.
To Next Page
