Why Airwell GC 18 Air Conditioner goes into protections?
If your Airwell Air Conditioner goes into protection mode and the compressor stops without a clear reason, it could be due to a control problem or a refrigeration system issue. Perform diagnostics and follow the actions described.
What to do if Airwell GC 18 Air Conditioner outdoor fan does not work?
If your Airwell Air Conditioner compressor is running, but the outdoor fan isn't working, the problem could be with the outdoor electronics or the fan itself. Check the outdoor fan motor according to the procedure. If it's not working, replace the controller.
How to fix Airwell GC 18 power supply indicator?
If the power supply indicator (Red LED) on your Airwell Air Conditioner doesn't light up, it indicates a lack of power supply. Check the power supply. If the power supply is OK, check the display and display wiring. If that is OK, replace the controller.
What to do if Airwell GC 18 Operate indicator does not light up?
If the Operate indicator (Green LED) on your Airwell Air Conditioner doesn't light up, but the unit responds to the remote, there's likely a problem with the display PCB. Replace the display PCB. If the issue persists, replace the controller.
How to prevent freezing of Airwell GC 18 outdoor unit?
To address freezing of the outdoor unit in heat mode and ice buildup at the base of your Airwell Air Conditioner, connect a base heater.
General| Brand | Airwell |
|---|---|
| Model | GC 18 |
| Category | Air Conditioner |
| Language | English |
Lists key technological innovations and benefits of the FLO DCI series.
Details features and types of indoor units.
Provides detailed specifications for the FLO 18 DCI model.
Provides detailed specifications for the FLO 21 DCI model.
Provides detailed specifications for the FLO 24 DCI model.
Provides detailed specifications for the FLO 30 DCI model.
Defines the operational temperature and voltage limits.
Details cooling and heating performance data.
Details cooling and heating performance data.
Details cooling and heating performance data.
Details cooling and heating performance data.
Presents sound pressure level data and spectra.
Provides electrical specifications for single-phase units.
Shows wiring diagram for indoor units.
Shows wiring diagram for outdoor units.
Shows wiring diagrams for FLO 24 DCI.
Shows refrigeration circuits for heat pump models.
Illustrates electrical connections for these models.
Details how compressor frequency is managed.
Lists and explains system protections.
Provides fault diagnosis and corrective actions.
Provides fault diagnosis and corrective actions.
Specific indoor unit fault diagnosis.
Exploded view and parts list for these models.
Exploded view and parts list for GC 18.
Exploded view and parts list for GC 24 Z.
To Next Page
