Airzone Think - Lite Thermostat: Basic Usage; Lite Thermostat On;Off and Mode Indication; Lite Thermostat Temperature Adjustment

18
E
N
EN
FR
IT
PT
DE
LITE THERMOSTAT
O
n/Off. Turns On and Off the zone. In addition, it indicates the operation mode with color codes.
Temperature Settings. Allows adjustment of the base set point temperature in increments of ± 1
C/2 F up to a limit of ± 3
C/6
F. This base set point temperature can be configured by any Blueface Thermostat.
Important: After 10 seconds of inactivity, the Lite Thermostat will turn off the LEDs. The first press on displays the status of
the Lite Thermostat (On or Off, Operation Mode and Set Point Temperature). After the first pulsation, turn On/Off or
increase/reduce the set point Temperature of the Lite Thermostat.
Important: After 10 seconds of inactivity, the Wireless Lite Thermostat will turn off the LEDs to save battery. The first press on
displays de status of the zone (On/Off, Operation Mode and Set Point Temperature). This pulsation enables the modification
of the desired parameters (On/Off or Temperature).
USE OF THE LITE THERMOSTAT
Adjusting the temperature
On/Off. Press the On/Off button to turn on or off the zone. This button also displays the operation mode. It follows a color
code system:
Purple: Stop User mode.
Red: Heating mode/Emergency heat.
Blue: Cooling and Dry mode.
Green: The set point temperature has been reached.
If the button remains solid, the thermostat is ON.
If the button is blinking, the thermostat is OFF.
The button remains solid for 10 seconds to show the status, then turns off.
On/Off
Temperature setting:
raise temperature
Temperature setting:
lower temperature