Need help?Do you have a question about the Airzone Flexa 3.0 and is the answer not in the manual?
General| Brand | Airzone |
|---|---|
| Model | Flexa 3.0 |
| Category | Thermostat |
| Language | English |
Steps for mounting and wiring the main control board of the Airzone system.
Instructions for installing the Airzone thermostat, including wiring and mounting.
Guide on connecting actuators to the control board's outputs for zone control.
Details on connecting the communication gateway or control gateway to the indoor unit.
Using the 01 port for unit start-stop functionality and its electrical specifications.
Instructions for connecting additional system peripherals as per their data sheets.
Guidance on connecting the main power supply to the control board and system components.
Step-by-step guide for configuring the Blueface Zero thermostat and system.
Steps for configuring the Airzone Think thermostat, including wireless association.
Instructions for configuring the Airzone Lite thermostat, including zone association.
Verifying the correct setup and operation of the installed Airzone system.
Procedure to reset the system to its factory default settings.
How to reset individual zone configurations to default settings.
Accessing and configuring advanced settings for the Blueface Zero thermostat.
Accessing and configuring advanced settings for the Airzone Think thermostat.
Advanced system configuration performed via the Airzone Cloud application.
Configuration of system-wide parameters such as address, temperature range, and hysteresis.
Configuration options for individual zones, including associated outputs and use mode.
Configuration of production control board parameters related to operation logic and modes.
Configuration for 2-pipe or 4-pipe systems, including activation delay and LWT temperatures.
To Next Page
