Airzone Flexa 3.0 - Initial Configuration; Airzone Blueface Zero Configuration

8
EN
Initial Configuration
AIRZONE BLUEFACE ZERO
Stages to be controlled:
• Air
• Radiant
• Combined
Master: Allows the control of
all installation parameters.
Zone: Only allows the control
of the zone parameters.
Select the zone associated to
this thermostat. Each zone
has a corresponding control
output (actuator output or
radiant element control relay
output).
Languages:
• Spanish
• English
• French
• Italian
• Portuguese
• German
The system allows you to
associate more than one
control output to a zone
if needed. It is therefore
possible to manage several
control outputs from a
single thermostat.
Finish the process, access
the advanced settings
and/or activate the basic
function (the latter allows
on/off, speed setting,
operation mode setting and
temperature setting).