Need help?Do you have a question about the Aiwa AV-X100 and is the answer not in the manual?
General| Power output | 25 watts per channel into 8Ω (stereo) |
|---|---|
| Total harmonic distortion | 0.8% |
| Input sensitivity | 2.5mV (MM), 150mV (line) |
| Dimensions | 430 x 105 x 285mm |
| Weight | 10.5 kg |
| Frequency response | 20Hz to 20kHz |
| Speaker load impedance | 8 ohms |
Avoid water, heat, ensure ventilation.
Proper power connection, cord handling.
Color-coded jacks for audio/video signals.
Details for front, center, surround, and subwoofer.
Positioning for Dolby Pro Logic/DSP effects.
Enhancing treble clarity with the BBE system.
Boosting bass realism with T-BASS.
Choosing input sources for playback.
Steps for recording audio from a selected source.
Tuning stations manually.
Tuning to specific frequencies.
Saving stations for quick access.
Step-by-step guide to choosing modes.
Solutions for no sound, one speaker, low volume, display errors.
To Next Page
