Aiwa HS-J36 User Manual

SM Code No 87-048
DATE OF ISSUE = 8./1987-T
MODEL
No.
HS
~
J36,
M TYPE. Y
ME BASIC MECHANISM : 2ME-—7
J360,/J330
WESTEREO
RADIO
CASSETTE
RECORDER
SPECIFICATIONS
Radio frequency range: FM: 87.5—108 MHz
AM: 530—1,605 kHz
Track arrangement: 4-track, 2-channel, stereo —
Frequency range: 40 to 12,500 Hz (NORMAL tape)
40 to 16,000 Hz (METAL tape)
Microphone: Electret-condenser microphone
Maximum output: "45 mW+ 15 mW (EIAJ/32Q)
. 20 mW +20 mW (EIAJ/16Q)
Power source: | aed oC 3V LR (SUM-3, AA,
Peeceatie AC power (using AC
Sy ee
Battery life: Been manganese batteries (R6, |
Approx. ve hours (EIAJ,
recording mode)
Approx. 5.5 hours (E!Ad, 1 mW
3 output, playback mode)
AIWA CO., Ltd.
@ Using alkaline batteries (LR,
AN-3, AA)
Approx. 7 hours (ElAd, hearing
mode)
Approx, 11 hours (ELAN, 1 mw
output, playback mode)
Maximum dimensions: . 84.2(H) x 118(W) x 35.6(0) mm...
Weight: oot — 285 g (including ae.
._ ™
&
Design
and
specifications
are
e
subject
t
to
“chang
;
without
notice.
© Noise reduction system manufactured under license frorn
Dolby Laboratories Licensing Corporation.
-@ Dolby and the 00 symbol are trademarks Bf. pale Labo-
ratories Licensing i ll
ert oP, es, Fin
Tokyo. Japan
Pi 1 ioe em

Aiwa HS-J36 Specifications

General

Type	Cassette Player
Brand	Aiwa
Model	HS-J36
Recording	Yes
Headphones	3.5mm Jack
Signal-to-Noise Ratio	50 dB
Release Year	1990
Features	Dolby B Noise Reduction
Power Source	2 x AA batteries
Playback Speed	1.7 cm/s (1 7/8 ips)

Summary

Disassembly Instructions

Control Panel Disassembly

Remove control panel screws.

Rear Cabinet Disassembly

Remove rear cabinet screws and knob.

Frame Disassembly

Remove frame screw, dissolder springs, open/unhook frame.

Cassette Box Removal

Remove cassette box screws and pull out.

Circuit Board Removal

Remove main and Dolby circuit board mounting screws.

Head Replacement Procedure

Remove panel, cabinet, play button for head replacement.

Accessories and Package List

Instruction Booklet (Y)

For models Y, YZ, Y1.

Instruction Booklet (YU)

For model YU.

Headphones HP-M12

For models Y, YU, YZ.

Headphones HP-09K

For model Y1.

Stereo Microphone

For model YU.

Clip Belt

Clip belt.

Adjustment Procedures

AM Frequency Range Adjustment

Adjust L1, TC1 for AM frequency range.

AM Tracking Adjustment

Adjust L11, TC2 for AM tracking.

FM Frequency Range Adjustment

Adjust L10, TC3 for FM frequency range.

FM Tracking Adjustment

Adjust L9, TC4 for FM tracking.

AM IF Adjustment

Adjust L8 for AM IF.

V. C. O Adjustment

Adjust SFR1 for V.C.O.

Practical Service Figures

Radio Section Specifications

Radio sensitivity, intermediate frequency, stereo separation.

Tape Section Specifications

Record bias frequency, erasing ratio, wow & flutter.

Distortion and Signal Noise Ratio

Distortion and signal to noise ratio limits.

Noise Level and Pinch Roller Pressure

Noise level and pinch roller pressure specifications.

Torque and Tension Specifications

Take up torque, FF/rewind torque, back tension specs.