Need help?Do you have a question about the Aiwa NSX-D939 and is the answer not in the manual?
General| Brand | Aiwa |
|---|---|
| Model | NSX-D939 |
| Category | Stereo System |
| Language | English |
Caution against exposing the appliance to rain or moisture to reduce fire or electric shock risk.
Check AC voltage, handle cords safely, unplug when not in use, and contact service for damaged cords.
Instructions for connecting power cord, speaker leads, and impedance notes.
Step-by-step guide to set the hour and minutes for the clock.
Adjusting bass enhancement (T-BASS) and high-definition sound (BBE) levels.
How to adjust left/right balance, volume, and use the mute function.
How to insert discs, start playback, and handle 8 cm discs.
Steps to program up to 30 tracks from any disc, including selecting disc, tracks, and starting playback.
How to select a preset number and store stations using the system or remote.
Steps for inserting tape, selecting Dolby NR, sides, direction, source, and starting recording.
Steps to insert tape, select Dolby NR, sides, direction, source, and press CD button.
How to start the synchronized recording process.
Steps to insert tape, select Dolby NR, press CD button, and prepare for AI EDIT recording.
Pressing EDIT-AI, selecting a disc, entering tape length, and starting the recording.
Prepare tape, press CD and EDIT-PRGM buttons, and insert CD beforehand.
Entering tape length, selecting a disc, and checking the program.
How to perform synchronized dubbing from tape to tape, including speed selection.
How to turn on the equalizer, select program mode, and choose a preset equalization curve.
Steps to turn on the equalizer and set the frequency and level for the first peak.
Setting other peak frequencies/levels, using the MEMORY button, and selecting presets.
How to open the control stage, turn on DSP, and select preset surround modes.
How to select Pro Logic 1, 2, or 3 modes based on speaker configuration.
How to press the DOLBY SURROUND button and cycle through modes like PRO LOGIC 1, 2, 3, etc.
How to adjust delay time based on speaker distances and select Dolby Surround modes.
How to select Dolby Surround mode and use the PRGM/TEST TONE button for calibration.
How to adjust the volume for center, surround, and front speakers using the remote and volume controls.
How the AI FUNCTION allows storing two complete system settings (source, sound, display) for quick recall.
How to recall stored AI FUNCTION settings by pressing A or B buttons, and notes on auxiliary sources.
How to select the desired function (TUNER, CD, TAPE) and band for timer programming.
Steps to set the on time, off time, and prepare the source (tape or CD) for timer operation.
Steps to adjust volume, hold WAKE UP, use MEMORY, set timer, and turn off the system.
How to set the sleep timer, cancel it, and what happens when the source or power changes.
How to connect a microphone, select the source, and adjust microphone volume.
Explains the AUTO VOCAL FADER function, its positions, and how to cancel it.
Common issues like no power, no sound, strange display, and tuner noise with causes and solutions.
Troubleshooting for tape movement, sound balance, recording issues, and CD playback problems.
To Next Page
