To Next PageTo Next PageHow to fix no sound on my Aiwa NSX-S116 Stereo System?
If your Aiwa Stereo System has no sound, check the following: Ensure the AC cord is properly connected. Verify there are no bad connections. If there might be a short circuit in the speaker terminals, disconnect the AC cord and correct the speaker connections. Also, confirm that you have pressed the correct function button.
What to do if the CD player on my Aiwa NSX-S116 Stereo System does not play?
If the CD player on your Aiwa Stereo System isn't playing, check these potential solutions: First, make sure the disc is correctly placed in the player. Second, verify the disc is clean. Finally, if condensation affects the lens, wait about an hour and then try playing the disc again.
Why does my Aiwa NSX-S116 have noise interference or distorted sound?
If your Aiwa Stereo System's reception has noise interference or the sound is distorted, try these steps: First, check if the system is picking up external noise or experiencing multipath distortion, and if so, change the antenna's orientation. You may also want to move the unit away from other electrical appliances.
How to eliminate constant static on my Aiwa NSX-S116?
If you are experiencing constant, wave-like static with your Aiwa Stereo System, verify that the antenna is connected properly. If the signal is weak, consider connecting an outdoor antenna.
Why is sound only coming from one speaker on my Aiwa Stereo System?
If sound is only coming from one speaker on your Aiwa Stereo System, check if the other speaker is disconnected.
Why is recording not possible on my Aiwa NSX-S116?
If you cannot record with your Aiwa Stereo System, check if the erasure prevention tab on the tape is broken off. Also, make sure that the recording head is clean.
What to do if my Aiwa NSX-S116 displays an error or malfunctions?
If your Aiwa Stereo System shows an erroneous display or malfunctions, reset the unit.
Why can't I erase on my Aiwa Stereo System?
If erasure is not possible on your Aiwa Stereo System, check if the erasure head is dirty. Also, verify whether you are using a metal tape.
Why is the sound off-balance on my Aiwa NSX-S116 Stereo System?
If the sound from your Aiwa Stereo System is off-balance or not adequately high, check if the playback head is dirty.
Why does the tape not run on my Aiwa Stereo System?
If the tape does not run on your Aiwa Stereo System, check if the deck is in pause mode.
General| Brand | Aiwa |
|---|---|
| Model | NSX-S116 |
| Category | Stereo System |
| Language | English |
Proper placement and ventilation for the audio unit to ensure safety and performance.
Instructions for safe connection and handling of the AC power cord.
Steps for connecting speakers, antennas, and AC power to the main unit.
Steps for initial power-on, demo mode, and display brightness.
Controlling volume and using the Super T-BASS system for enhanced sound.
Steps for loading discs and performing basic playback operations.
Guide to recording audio from various sources onto cassette tapes.
Instructions for setting the unit's clock and switching between 12/24 hour formats.
How to configure the sleep timer to automatically turn off the unit.
Guidance on cleaning the unit, tape heads, and handling discs and tapes.
Solutions for common issues encountered with the stereo system.
