To Next PageTo Next Page
Need help?Do you have a question about the Aiwa XR-M201 and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Tuner Bands | FM, MW |
| Inputs | Phono, CD, Tuner, Tape, Aux |
| Outputs | Headphones, Speakers |
| Tuning Range | FM, AM |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Speaker Load Impedance | 8 ohms |
Detailed specifications for the FM tuner section.
Detailed specifications for the AM tuner section.
Detailed specifications for the MW tuner section.
Detailed specifications for the LW tuner section.
Power output and distortion specifications for the amplifier.
Input and output signal levels and impedance specifications.
Specifications for tape format, frequency response, and S/N.
Specifications for laser, D/A converter, and S/N.
Power requirements, dimensions, and weight specifications.
Important warnings and cautions regarding laser radiation exposure during servicing.
Procedures and precautions for replacing the optical block to prevent damage.
Instructions for arranging FFCs to prevent trapping during front panel service.
Specific steps for arranging FFC-B to avoid damage during CD unit assembly.
Step-by-step guide for assembling the CD unit into the main chassis.
Instructions for routing and securing FFC-C during assembly to avoid interference.
List of integrated circuits used in the main unit with part numbers.
List of transistors used in the main unit with part numbers.
List of diodes used in the main unit with part numbers.
List of capacitors and other components on the main circuit board.
Explanation of the coding system for chip resistors.
Visual representations and pinouts for various transistors.
Detailed pin assignments for the LCD display module.
Functional block diagrams for major ICs like LC72131D, LA9241ML, BU1920FS.
Detailed pin descriptions for the M38258 IC.
Detailed pin descriptions for the LA9241ML IC.
Detailed pin descriptions for the LC78622ED IC.
Detailed pin descriptions for the LC72131D IC.
Procedures for adjusting tuner frequency, VT, and tracking.
Procedures for DC balance, mono distortion, and FM separation checks.
Procedures for adjusting tape speed, head azimuth, and PB response.
Procedure for focus bias adjustment in the CD section.
Overall exploded view of the unit's mechanical components.
Comprehensive list of mechanical parts for the unit.
Exploded view of the 2ZM-1 YR9NC tape mechanism.
Parts list for the 2ZM-1 YR9NC tape mechanism.
Exploded views of the 3ZG-3 E3NC CD mechanism.
Parts lists for the 3ZG-3 E3NC CD mechanism.
Second part of the exploded view for the CD mechanism.
Second part of the parts list for the CD mechanism.
List of included accessories and package contents for different models.
