SCC cancelled
When SCC is activated, press the
button on the steering wheel, and the instrument intelligent
driving inactivated indicator lamp
lights up and prompts "SCC is Canceled". At the same time, the
cruise icon
lights up, and the simulated lane line of the instrument turns gray. SCC switches to
standby state.
In addition, SCC may automatically turn off under the following circumstances, thus the driver needs to
take over the vehicle actively:
●
Step on the brake pedal when it is not stationary;
●
Put the vehicle in a gear other than forward gear;
●
The seat belt on the driver's side is unfastened;
●
The accelerator pedal is stepped on for too long;
●
Any door of the car is open;
●
The front compartment hood is opened;
●
The tailgate is open;
●
The electric parking brake switch is pulled;
●
Sensor failure or system failure;
●
The electronic stability program system turned off;
●
The electronic stability program system is activated;
●
The autonomous emergency braking is activated;
●
The hill descent control function is activated.
SCC override
After SCC is activated, when the driver steps on the accelerator pedal and the instrument prompts "Driver
steps on the accelerator, SCC cannot decelerate", SCC will enter the override state, the speed of the
vehicle will temporarily increase, and the cruise will temporarily quit work. When the driver releases the
116 | AIWAYS
To Next Page
Loading...
