●
No lane line is identified;
Forward Collision Warning (FCW)
The forward collision warning function can continuously monitor whether there are vehicles or pedestrians
in front of the current lane within the speed range of 10-120km/h. When the system detects the possible
collision risk, it will remind the driver to brake in time through visual and auditory alarms to avoid
accidents. You can set the sensitivity level of the FCW function on the console screen or turn off this
function. When the FCW function is turned off, the FCW/AEB function off indicator lamp
on the
instrument will be on.
PATH: Vehicle Settings - Advanced Drive Assustance Service - Forward Collision Warning
WARNING: It is strictly forbidden to perform collision warning test on the FCW function to avoid accidents
caused by unforeseen circumstances.
CAUTION:
●
Please set the FCW function in an environment where the vehicle is stationary and safety is ensured.
●
The FCW function is a driver assistance function and it only provides warning for dangerous conditions.
The driver shall be responsible for the safety of all driving behaviors. Even if the FCW function is
AIWAYS | 119
To Next Page
Loading...
