You can turn on the BSD through the central control screen. If the BSD is turned on, the Lane Change
Warning (LCW) activates.
PATH: Vehicle Settings - Advanced Drive Assistance Service - Blind Spot Detection
CAUTION:
●
LCA function is a driving assistance function, which cannot replace direct visual observation. Even if it
is equipped with LCA function, the driver must be concentrated, drive carefully and always observe the
road conditions to avoid accidents. The driver should not only rely on the LCA function to remind
himself/herself that objects or vehicles are approaching quickly behind the side. Many external factors
will reduce the performance of LCA function.
●
Before changing lanes, please check whether the vehicle can change lanes safely by looking in the
rearview mirror and turning your head properly. The performance of LCA is affected by several factors,
which will lead to missing alarm or false alarm.
●
When the vehicle gear is switched to reverse gear, parking gear or the driving speed of vehicle is lower
than 15km/h, the lane change warning function will be automatically turned off.
One of the following conditions may cause failed radar identification and poor LCW performance, including
but not limited to:
AIWAYS | 133
To Next Page
Loading...
