You should only use child safety seats that have obtained official approval and are suitable for children.
Children over 1.35 m tall can directly wear the seat belts. Child safety seats should comply with relevant
rules, regulations and standards.
NOTE: Always read the owner’s manual section on installing a child seat before installing one in the car.
Permissible types of child seats
Child seat type recommendations are as follows:
●
Universal child seats,installed using the vehicle’s three-point seat belt.
●
ISOFIX child seats,installed to the ISOFIX anchorages in the vehilce rear outboard seat positions.
●
i-Size child seats,installed to the ISOFIX anchorages in the vehicle rear outboard seat positions.
Mounting child seats
CAUTION: When installing/uninstalling the child seat, always follow instructions from both the child safety
seat manufacturer and vehicle manufacturer.
NOTE: The rear seats are the preferred place for children to sit in with child safety seat.
Vehicle three-point seat belt fixation
After installing the child safety seat in the rear seat,ensure the buckle is fully extended,and pull the seat
belt across the child safety seat and buckle the seat belt.Make sure the seat belt is flat,not twisted,and
securely fastened.
ISOFIX/i-Size child seat fixation
AIWAYS | 35
To Next Page
Loading...
