1. where provided,with the child seat,fit the plastic funnel guides to the ISOFIX anchorages located
between the vehicle rear seat back and cushion.
2. Push the child safety seat anchorage probes onto the ISOFIX anchorages until you hear a “click.”
3. Once installed,pull the child safety seat forward to check that it is securely fixed.
Top-tether anchor fixation
Top-tether anchors are additional mounting points on the rear side of the backrest.
If your vehicle is equipped with anchorage points for ISOFIX or i-Size fixture systems, on the rear outboard
seat positions,these will also be equipped with top tether anchorages on the back of the rear seat.
1. Follow the instruction for ISOFIX or i-Size child seat fixation.
2. Route the top tether strap over the seat back,and attach the strap to the top tether anchorage.
3. Tighten the strap to ensure it is fixed securely.
4. Pull the child safety seat forward to ensure it is fixed securely.
For detailed installation instructions, please refer to the user guide that comes with the child safety seat.
If required,ISOFIX anchorages can be retrofitted to the vehicle later.Please consult your nearest Aiways
dealership for information.
36 | AIWAYS
To Next Page
Loading...
