2. Step on the brake pedal and hold it, press down the electronic parking switch, release the brake, and
the gear will automatically switch to neutral (N), and the central control screen will display "READY"
status, indicating that the vehicle is ready;
3. Step on the brake pedal and hold it, rotate the gear lever backward to enter the drive gear (D), release
the brake pedal slowly, and your car will move forward slowly.
4. If you want to reverse, step on the brake pedal and hold it, rotate the gear lever forward to enter the
reverse gear (R), slowly release the brake pedal, and your car will move backward.
When parking, step on the brake pedal. Press the P button, and the gear lever is shifted to the parking
gear (P), and the EPB is automatically enabled.
Electronic parking brake (EPB)
The electronic parking (EPB) switch is located on the left side of the driver's instrument panel. Please
enable the EPB when parking.
Step on the brake pedal when the vehicle is stationary, pull up the EPB switch to enable the EPB.
Step on the brake pedal when the vehicle is stationary, press the EPB switch to release the EPB.
WARNING:
AIWAYS | 77
To Next Page
Loading...
