BODYWORK :
• Bodywork: quadrimobile
• Materials used for the bodywork: Thermoformed ABS PMMA
• Number of permissible seats:
- light quadricycle of category L6e: 2 (2 front seats)
- heavy quadricycle of category L7e 4 (2 front seats + 1 rear seat)
• Number of doors: 2
• Materials used for windows:
- Windscreen: laminated glass
- Side windows: tempered glass
- Rear window: tempered glass
LIGHTS AND SIGNALS
• Front lights:
indicators and parking lights: 12V/21W
dipped beam and full beam headlights 12V/50W/60W
fog lights: 12V/35W (depending on model)
daytime LED lights: 12V/4W
• Rear lights:
rear and stop: 12V/5W/21W
fog lights: 12V/16W
reversing and indicators: 12V/16W
numberplate light: 12V/5W
PRE-DELIVERY CHECKS
After all the care taken to make your AIXAM vehicle, your
approved distributor carries out a list of inspections, so that
you can get the most out of your new vehicle:
• Verification of the closing and locking mechanism of all
openings (doors, windows, bonnet, tailgate, etc.)
• Verification of seat belts, door opening and closing
controls (locks and locking system)
• Verification of on-board tools
• Verification of levels of:
engine oil and inverter unit oil
windscreen wash
brake fluid
coolant and anti-freeze liquid
• Verification of the sealing of the braking and cooling circuit
• Tyre pressure check (including spare wheel if there is one)
• Verification of tightness of wheels, ball joints, engine,
regulator, reduction gear and reverser bridge, screws in
general.
• Verification of operation of electrical and lighting devices.
• Verification of the charge level of the starter battery and
the tightness of the lugs.
• Verification of alignment.
• Idling adjustment
• Vehicle test
• Interior and exterior cleaning
To guarantee your vehicle's performance and
longevity, demand original AIXAM parts for the
maintenance and repair of your vehicle.
To Next Page
Loading...
