Aixam CROSSOVER - Page 35

34
Setting the time
Step 5-5
Step 5-1
 Press the right button on the panel
 the tenths of minutes increase in 10-minute
steps
 Press the left button on the panel for four
seconds
 The clock symbol is highlighted
Step 5-6
 Press the left button on the panel
 The minutes flash
Step 5-2
 Press the left button on the panel for four
seconds
 The clock is displayed and the hours flash
Step 5-7
 Press the right button on the panel
 the minutes increase in one-minute steps
Step 5-3
 Press the right button on the panel
 The hour increases in one-hour steps
Step 5-8
||
 Press the left button on the panel for four
seconds
 Programmable function selection screen
Step 5-4
■
 Press the left button on the panel
 The tenths of minutes flash
Step 5-9
 Press the left button on the panel
 Automatic return after 10 seconds
 Digital speed screen