of authorized Ajax partners is .
Case cannot be installed
The casing can be damaged if you install it:
Preparing to install devices into Case
Which Case to choose
Use to get the most optimal placement of your Fibra devices
in the casing.
Cable arrangement
When preparing to cable routing, check the electrical and fire safety regulations
in your region. Strictly follow these standards and regulations. Tips for cable
arrangement are available in .
Cable routing
We recommend you read the section carefully
before installation. Avoid deviations from the system project. Violating the basic
installation rules and the recommendations of this manual may lead to incorrect
operation and loss of connection with devices installed into Case.
Preparing cables for connection
available here
1. Outdoors.
2. Inside premises with temperature and humidity values that do not
correspond to the operating parameters.
Case configurator
this article
Selecting the installation site
How to route the cable
To Next Page
Loading...