AJAX Hub 2 Plus User Manual

Monitoring Station
central monitoring station of the security
organization:
If this �eld is displayed, the security company
uses a direct connection to receive events and
security system alarms
Hub model
Hub model name
Hardware version
Hardware version. Unable to update
Firmware
Firmware version. Can be updated remotely
ID
ID/serial number. Also located on the device box,
on the device circuit board, and on the QR code
under the SmartBracket panel
Rooms





— the hub is directly connected to
the central monitoring station of the security
organization

— the hub is not directly
connected to the central monitoring station of
the security organization
What is a direct connection?

AJAX Hub 2 Plus Specifications

General

Maximum Number of Devices	200
Maximum Number of Cameras	100
Maximum Number of Users	200
Battery Backup	Up to 15 hours
Operating Temperature Range	-10°C to +40°C
Maximum Number of Security Groups	25
Humidity	Up to 75%
Communication Channels	Ethernet, Wi-Fi
Power Supply	110-240 V AC
Dimensions	163 x 163 x 36 mm
Communication Range	Up to 2, 000 m in open space
Radio Frequency Bands	868.0–868.6 MHz
Supported Devices	Motion detectors, door/window sensors, sirens
Encryption	AES encryption
Firmware Updates	Over-the-air (OTA)