AJAX Key Pad - Page 4

Key Pad can notify a security company of the system being disarmed by
force. The Duress Code — unlike the panic button — does not activate
sirens. Key Pad and the app notify of successful disarming the system, but
the security company receives an alarm.
Indication
When touching Key Pad, it wakes up highlighting the keyboard and
indicating the security mode: Armed, Disarmed, or Night Mode. The
security mode is always actual, regardless of the control device that was
used to change it (the key fob or app).
Event
Indication
Malfunction indicator blinks
Indicator notifies of a malfunction in the Ajax security system,
as well as about no communication with the hub. You can check
the reason for malfunction in the Ajax Security System app.
Key Pad button pressed
Short sound signal
The system is armed
Short sound signal, Armed mode / Night mode LED indicator
lights up
The system is disarmed
Two short sound signals, LED disarmed LED indicator lights up
Incorrect passcode
Long sound signal, the keyboard backlight blinks 3 times
Failed to arm one or several detectors
(e.g., a window is opened)
Long sound signal, the security mode indicator blinks 3 times
A malfunction is detected when arming
(e.g., the detector is lost)
Long sound signal, the malfunction indicator blinks 3 times
The hub does not respond to the
command — no connection
Long sound signal, the malfunction indicator lights up
Key Pad is locked after 3 unsuccessful
attempts to enter the passcode
Long sound signal, security mode indicators blink
simultaneously
Low battery
After arming/disarming the system, the malfunction indicator
blinks smoothly. The keyboard is locked while the indicator
blinks.
When activating Key Pad with low batteries, it will beep with a
long sound signal, the malfunction indicator smoothly lights up
and then switches off.