States can be found in the :
Parameter Value
Malfunction
Click to open the list of MultiTransmitter
malfunctions
The field is displayed only if a malfunction is
detected.
Jeweller Signal Strength
Signal strength between the hub and
MultiTransmitter
Connection
Connection status between the hub and
MultiTransmitter
Battery Charge
Battery level of the device. Displayed as a
percentage
Lid
The status of tampers that respond to
detachment or violation of the integrity of the
body
External Power The presence of external power supply 110/230 V
ReX “range extender name”
The ReX range extender connection status.
Displayed if MultiTransmitter is working via a
Detector power line Status of detector power terminals:
Ajax app
1. Go to the Devices tab .
2. Select MultiTransmitter from the list.
How battery charge is displayed in
Ajax apps
What is a tamper
ReX radio signal range extender
OK — terminals in normal condition
Shorted — terminals are shorted
To Next Page
Loading...
Need help?
General
