If MultiTransmitter is not assigned to the hub or has lost connection with it, the integration
module will not give an indication of the battery status or the presence of external power
supply.
Operating principle
MultiTransmitter is designed for connecting third-party wired detectors and devices
to the Ajax security system. The integration module receives information about
alarms and triggering of detector tampers via wires connected to the terminals.
MultiTransmitter can be used to connect panic and medical alarm buttons, indoor
and outdoor motion detectors, as well as detectors tracking opening, vibration,
breaking, fire, gas, leakage, etc. The type of device is indicated in the zone settings.
The text of notifications about alarms and events of the connected device, as well
as event codes transmitted to the Central Monitoring Station (CMS) of the security
company depend on the selected device type.
A total of 6 types of devices are available:
Type Icon
Tamper
To Next Page
Loading...
Need help?
General
