MultiTransmitter LED indicator may light up white, red, or green, depending on the
status of the device. Please note that the LED indicator is not visible when the body
lid is closed, but the status of the device can be found in the Ajax app.
LED indication Event Note
Lights white
Connection with the hub is
established, external power
supply is connected
Lights red
There is no connection with the
hub, external power supply is
connected
For example, the hub is turned
off or MultiTransmitter is
outside the coverage area of the
hub’s wireless network
Goes out for 0.5 seconds, then
lights up green and turns off
Switching off the
MultiTransmitter
Blinks red once per second
MultiTransmitter is not
assigned to the hub
Lights up for a second once
every 10 seconds
No external power supply is
connected to MultiTransmitter
Lights up white if there is
connection with hub.
Lights up red if there is no hub
connection
During an alarm, gradually lights
up and goes out once every 10
seconds
No external power supply and
discharged external battery of
MultiTransmitter
Lights up white if there is
connection with hub.
Lights up red if there is no hub
connection
To Next Page
Loading...
Need help?
General
