AJAX MultiTransmitter User Manual

Note that after changing the settings, you should click the Back button to save them.
Setting Value
First field
Integration module name that can be edited. The
name of the device is displayed in the text of SMS
and notifications in the event feed.
The name can contain up to 12 Cyrillic characters
or up to 24 Latin symbols
Room
Selecting the virtual room to which
MultiTransmitter is assigned. The room name is
displayed in the text of SMS and notifications in
the event feed
Alert with a siren, if power supply for detectors is
shorted out
When enabled, sirens connected to the security
system signal if detectors power line is shorted
out
Jeweller Signal Strength Test
Switches the integration module to the Jeweller
signal strength test mode. The test allows you to
check the signal strength between the hub and
MultiTransmitter and determine the optimal
installation location
Attenuation Test
Switches MultiTransmitter to the signal
attenuation test mode
Temporary Deactivation Allows the user to disconnect the device without
removing it from the system.
1. Go to the Devices tab .
2. Select MultiTransmitter from the list.
3. Go to Settings by clicking on the icon.
What is Jeweller Signal Strength Test
What is signal attenuation test

AJAX MultiTransmitter Specifications

General

Brand	AJAX
Model	MultiTransmitter
Category	Safety Equipment
Language	English