Using Tag or Pass with Two-Stage Arming enabled
Tag and Pass can participate in two-stage arming, but cannot be used as second-stage
devices. The two-stage arming process using Tag or Pass is similar to arming with a
personal or general keypad password.
Maintenance
Tag and Pass are battery-free and maintenance-free.
Tech specs
Technology used DESFire®
Operating standard ISO 14443-А (13.56 MHz)
Encryption +
Authentication +
Protection from signal interception +
Possibility to assign the user +
Maximum number of bound hubs Up to 13
mode change button. The security mode will change to the opposite after holding or
tapping Tag or Pass.
Learn more
What is two-stage arming and how to use it