Need help?Do you have a question about the Akai AA-1030 and is the answer not in the manual?
General| Power Output | 30 Watts per channel |
|---|---|
| Frequency Response | 20Hz to 20kHz |
| Total Harmonic Distortion | 0.5% |
| Tuning range | FM, MW |
| Input Sensitivity | 2.5 mV (phono), 150 mV (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
| Signal to Noise Ratio | 75 dB |
Adjustment steps for the Long Wave (LW) tuner section.
Adjustment steps for the Medium Wave (MW) tuner section.
Chart detailing interchangeable Printed Circuit Board models.
Overview of components found on different PC boards.
To Next Page
