Need help?Do you have a question about the Akai AA-1150 and is the answer not in the manual?
General| Tuning range | FM, MW |
|---|---|
| Speaker load impedance | 4 - 16 ohms |
| Power Output | 50 watts per channel into 8Ω (stereo) |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | 0.1% |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Signal to noise ratio | 80 dB |
| Channel separation | 50dB (1kHz) |
Details power output, bandwidth, S/N ratio, and impedance for amplifier sections.
Covers FM and AM frequency ranges, sensitivity, selectivity, and distortion for tuner sections.
Lists and describes the front panel controls, indicators, and jacks for the AA-1135 model.
Provides step-by-step procedures for adjusting FM tuner sensitivity, separation, and mute level.
Provides step-by-step procedures for adjusting AM tuner scale indication and sensitivity.
Details the procedure for adjusting the idling current in the left and right channels of the main amplifier.
To Next Page
