Akai ABTS-70

EN - ENGLISH
Note: Once speakers have been paired via AWS, they will pair again each time they are turned
on. If you want to unpair them, press the to disconnect. The speaker will beep and both
LEDs will flash indicating the speakers are no longer paired.
Troubleshooting
Power Bank Mode:
1. Use a charging cable that is compatible with your mobile device, making sure it has a USB-
A connector on the other end.
2. Once you have connected your mobile device to the speaker’s USB-A output, the charge
port can provide 5V/1000mAh output.
If your device tries to draw more current than the speaker can output, the speaker will shut off
the USB port for your safety.
The speaker will not charge the mobile device if the power is off.
Issue
Possible solution
No power
• Make sure your speaker is turned on and
charged.
No sound
• Make sure the volume of your speaker is not at
the lowest setting.
Make sure the connected audio device is playing
audio.
Sound is distorted.
• Turn down the volume of the speaker or the
connected device.
Cannot pair the speaker with my
Bluetooth device
• Make sure your device is on Bluetooth mode.
• Your Bluetooth device may be out of range.
Try to bring it closer to the speaker.
• Move your Bluetooth device and/or speaker
away from other devices that generate
electromagnetic interference, such as phones,
microwave ovens, wireless network routers, or
other Bluetooth devices.