Press the REPEAT button (27) again to repeat the current title.•
Press the REPEAT button (27) again to repeat all chapters or tracks.•
Press the REPEAT button (27) again to cancel the function.•
● To view a specic title of a DVD, press the TITLE button (11). Use the
arrow buttons (14) to select the title.
● To switch on the subtitles of a DVD, press the SUBTITLE button (11). To
switch off the subtitles of a DVD, press the SUBTITLE button (11) again.
● To select the audio language of a DVD, press the AUDIO button (13)
repeatedly until the desired language is set.
● To select extra information of a DVD or CD (remaining time/passed
playtime/track number/chapter number), press the DISPLAY button (22).
● To select the camera angle, press the ANGLE button (13).
i
● Normally, if an MP3 disc is loaded, the unit will take longer time to read
the initial data.
● A DVD that does not match the region code cannot be read by this
appliance.
● If a disc contains mixed content (e.g. MP3 and video les), the appliance
will only recognise, list and play one content type.
● The screen saver becomes active if no disc has been loaded for
3 minutes, or if the appliance has been in STOP mode for 3 minutes.
Using the GOTO function
The GOTO function can be used to select a specic starting point on a DVD
or CD.
● Press the GOTO button (21).
● Press the arrow buttons (14) to select an entry.
The possible entries for DVD are:
Disc time -
Chapter -
Title -
Chapter time -
Title time -
The possible entries for CD are:
Track time -
Specic track -
● Press the digit buttons (9) to set a selection.
To Next Page
Loading...
Need help?
General
