Using the ZOOM function
This function can be used for zooming in and out on photos and DVDs.
The available zoom ratios are: ZOOMx1/ZOOMx2/ZOOMx4
(DVD/VCD/MPEG4); 25%/50%/100%/150%/200% (JPEG).
● Press the ZOOM button (10).
● Press the ZOOM button (10) again to set the correct size.
● Press the arrow buttons (14) to move through the picture.
USB functions5.3
After the device has been connected, a content menu will display on the TV
screen.
● Press the up/down arrow buttons (14) to select a folder or a le.
● Press the OK button (15) to enter the selected folder or to play the le.
You can also use the digit buttons (9) to select a folder or to play the le.
● Press the PROG button (27) to switch between folders and les. Press the
OK button (15) to conrm.
● Press the MENU button (10) to return to the content menu during
playback.
During playback, the following functions are available:
● To select a track, press the PREV button (18) or the NEXT button (19)
until the desired track is set.
● To pause playback, press the PLAY/PAUSE button (26). To resume
playback, press the PLAY/PAUSE button (26) again.
● To stop playback, press the STOP button (25).
● To remove the device, gently pull it out of the slot.
i
Due to the great variety of products with USB ports and their
sometimes quite manufacturer-specic functions we can neither
guarantee that all devices will be recognised, nor that all operating
options that are possible in theory will actually work.
Using the PROGRAM function
MP3/MPEG4/WMA
● Press the up/down arrow buttons (14) to select the le.
● Press the right arrow button (14) to add the le to the program list.
● Press the PROG button (27) for more than 2 seconds. A program menu
will be created.
To Next Page
Loading...
Need help?
General
