15
After Sales Support
1300 886 649 (AUS) 0800 836 761 (NZ) | info@tempo.org
Button Function
1 POWER
Start or stop operation.
2 MODE Select the mode of operation.
3 FAN Select the fan speed.
4 SWING [R/L]
Activate or deactivate the deflectors
for right/left air movement.
5
MUTE Activate the mute function.
HEALTH Not available on this model.
6 TURBO
Enable the unit to reach the preset
temperature in the shortest time.
7
[DOWN] Decrease temperature or time setting.
[UP] Increase temperature or time setting.
8 ECO
In cooling mode, the room tempera-
ture will be allowed to rise 2°C above
the set temperature before cooling
restarts; in heating mode, it will be
allowed to fall 2°C below the set tem-
perature before heating restarts.
9 TIMER Set to switch on and off automatically.
10 DISPLAY Switch on/off the LED display.
11 SLEEP Activate the sleep function.
12
SWING
[UP/DOWN]
Activate or deactivate the flaps for
up/down air movement.
13
I FEEL
Activate/deactivate the I FEEL function
for automatic regulation of the room
temperature based on the temperature
around the remote controller.
CLEAN
Switch on/off the 30-minute self-clean
function (recommended every three
months).
14 I SET Switch on/off the I SET function.
LOCK
Press the MODE and TIMER buttons at
the same time to activate the child lock
and lock the remote control buttons.
Remote control buttons
NOTE:
Every time you
press a button,
the unit confirms
with a beep the
correct reception
of each action.
Instructions (Cont.)
Fig. 8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
To Next Page
Loading...
