In cooling mode, what to do if no cool air is coming out of my Akai Air Conditioner?
If your Akai Air Conditioner isn't blowing cool air in cooling mode, it might be because the room temperature is lower than the set temperature. Try setting the temperature lower than the room temperature. If that doesn't work, call a local technician for repairs.
What to do if the red FULL light is bright and error code "E4" appears on my Akai AC-ZP112?
If you see error code "E4" and the red FULL light is on, it means the water tray is full while in heating mode. Empty the water from the water plate to resolve this issue.
Why does my Akai AC-ZP112 Air Conditioner stop running automatically?
Your Akai Air Conditioner might stop running automatically if the timer is set, or if the room temperature is lower than the set temperature. To solve this, close the TIMER or wait for it to run automatically.
What does error code "E3" mean on my Akai AC-ZP112?
Cooling system malfunction caused by the lack of refrigerant. Contact the local repairing technician directly
How to fix error code "E1" on Akai AC-ZP112 Air Conditioner?
Error code "E1" indicates that the environment temperature sensor is broken. Replace the temperature sensor to fix this.
What does error code "E2" mean on my Akai AC-ZP112 Air Conditioner and how to fix it?
Error code "E2" indicates that the temperature sensor on the evaporator is broken. Replace the sensor to resolve the issue.
General| Brand | Akai |
|---|---|
| Model | AC-ZP112 |
| Category | Air Conditioner |
| Language | English |
Details the functions of the ON/OFF, Mode, Fan Speed, Temp, Timer, and Swing buttons on the control panel.
Explains the functions of the Mode, Fan Speed, Swing, Temp, Timer, and ON/OFF buttons on the remote control.
Instructions for operating the air conditioner in cooling mode using the remote control.
Instructions for operating the air conditioner in fan mode using the remote control.
Instructions for operating the air conditioner in dehumidifying mode using the remote control.
Details on setting auto OFF and auto ON timer functions using the remote control.
Step-by-step guide for inserting batteries into the remote control, emphasizing polarity.
To Next Page
