Battery Operation
Please notice the anode and cathode while mounting the batteries.
We suggest using alkaline batteries.
If the battery is to be replaced or thrown away, the batteries must
be removed and dispose of in accordance with the current laws as it
represents an environmental hazard.
Remote control inserting the batteries
1. slide the cover as shown in figure.
2. insert two new non-rechargeable batteries, being careful to place
them in the correct position(+) and (-).
3. put the cover back on, letting it slide into its original position.
4. the display will show all of the remote control’s symbols for
several seconds.
The operation of Air exhaust duct assembling
M ou n ting du ct
Adaptor
Air exhaust duct
Inn er air exhaust adaptor
2
1
3
4
5
-10-
To Next Page
Loading...
Need help?
General
