Akai AM-U210 - Specifications

SPECIFICATIONS
Rated Power Output
(Both Channels Driven)
20 Hz to 20 kHz, 8ohms.. .
20 Hz to 20 kHz, 4ohms ..
1 kHz, 8 ohms
1 kHz, 4 ohms
French Norm
Power Bandwidth
(1HF —3 dB, 8 ohms)
Signal to Noise Ratio (IHF-A)
PHONO to SPEAKER
TUNER, AUX, TAPE to
SPEAKER
Residual Noise
(IHF-A 8 ohms)
Channel Separation
Damping Factor (8 ohms)
Output
Required Speaker
impedance
Input Sensitivity /|Impedance
PHONO
TUNER, AUX, TAPE
Output Level
PHONO Maximum Input Level
(1 kHz)
Frequency Response
PHONO (RIAA Deviation). . .
TUNER, AUX, TAPE
Tone Control
Treble
Loudness Control
(Volume set at —30 dB
position)
Power Requirements
Dimensions
Weight .....-.--.-2-225-
*
change without notice.
.30W x 2/T.H.D. 0.05%
-33W x 2/T.H.D. 0.08%
35W x 2/T.H.D. 0.05%
38W x 2/T.H.D. 0.08%
. 0.1%)
300 nV
50 dB (1 kHz)/56 dB (40 Hz)/35 dB
(10 kHz)
27 (1 kHz)/27 (40 Hz}/25 (12.5 kHz)
4 to 16 ohms
2.5 mV/47 kohms (MM)
150 mV/100 kohms
150 mV
150 mV (MM)
+0.5 dB
5 Hz to 80 kHz (—3 dB)
+10 dB (100 Hz}
+6 dB (10 kHz)
120V, 60 Hz for USA and Canada
220V, 50 Hz for Europe except UK
240V, 50 Hz for UK and Australia
110V/220V/240V, 50/60 Hz switch-
able for other countries.
440(W) x 100(H) x 247(D) mm
(17.3 x 3.9 x 9.7 inches)
4.9 kg
(10.8 Ibs)
For improvement purposes, specifications and design are subject to