clock digits are flickering or leave the digits flicker 5 times until the
input time is automatically confirmed.
SETTING TIME ALARM
Repeatedly short press " Mode" key to get into "
-Time Alarm"
setting state and when "
" sign flickers, short press Memory/ Clock
key so that hour digit will flicker for 5 times. While hour digit flickers,
directly input hour digit with 0~9 number keys or select hour digit
by short pressing " + " or " - " key and then press Memory/ Clock
key while hour digit is flickering. This time minute digit will flicker
for 5 times. Input minute digit with 0~9 number keys while minute
digit is flickering or select minute digit by pressing " + " or " - " key.
Note: Confirm input time by short pressing Memory/ Clock key while
clock digits are flickering or leave the digits flicker 5 times until the
input time is automatically confirmed.
TIME AUTO POWER-ON AND STARTING TIME ALARM
After setting auto power-on time at clock state,
short press Alarm/ Snooze key to start and
select time auto power-on and time alarm
functions. For example, "
" on or " " on,
or "
" both on.
"
" On State: If time arrives at " " preset
time, radio will turn on and receive the station
you received before turning off the radio. Press
Power key to turn it off. If you do not press
Power key, the radio will automatically turn off
in an hour.
If you press Alarm/ Snooze key during "
" power-on process, the
radio will snooze for 5 minute before turning on and if you press
Power key during snooze, it will exit from snooze. "
" On State:
If time arrives at "
" preset time, alarm will start. You can press
any key stop the alarm or it will automatically stop in an hour:
Note:
"
" has preference over " ". That is, if " " time and " " time is
12
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
Flickering
To Next Page
Loading...
Need help?
General
