Need help?Do you have a question about the Akai APW10 and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Tuning range | FM, MW |
| Power output | 10W per channel |
| Frequency response | 20Hz to 20kHz |
| Input sensitivity | 2.5mV (MM) |
| Signal to noise ratio | 70dB |
| Speaker load impedance | 8Ω to 16Ω |
Shows the current frequency or time on the radio's LCD screen.
Displays signal strength and FM stereo reception status.
Shows status of key functions like alarm, power, and key lock.
Indicates saved station addresses and selected radio bands.
How to check and use the key lock switch for preventing accidental operation.
Adjusting reception sensitivity for SW/FM bands.
Step-by-step guide to setting the radio's clock time.
How to turn the radio on and off using the power switch.
Setting the radio to turn on automatically at a preset time.
Setting a timer for the radio to automatically turn off.
Manually tuning to find radio stations.
Automatically scanning for and stopping at radio stations.
Automatically searching and saving up to 10 stations.
Storing and recalling favorite radio stations.
Directly entering the frequency to tune to a station.
Setting the duration for the sleep timer.
Disabling the sleep timer function.
Using the built-in magnetic antenna for MW reception.
Using the 360° antenna for FM reception.
Using the 360° antenna for SW reception.
Connecting an external antenna for weak FM/SW signals.
To Next Page
