9
AR270P
● Press the alarm button (7/8) again to conrm. The corresponding alarm
indicator (20/16) comes on.
i
During a power failure, or when unplugging the appliance, the time
settings are lost, unless backup batteries are installed.
Radio functions5.2
● To switch on the radio, press the RADIO/SLEEP button (13) once.
The display (11) shows ON and ashes.
● Press the arrow buttons (up and down) (14) to select a frequency or radio
station. Press and hold the corresponding button to accelerate the
process.
● To adjust the volume level, turn the VOLUME dial (21) to the required
position.
● To switch off the radio, press the RADIO/SLEEP button (13) again.
i
The MEMORY function can be used to select a preset radio
station. Read the paragraph "Using the MEMORY function".
i
To improve the reception of the FM frequency, extend the aerial
antenna.
Using the MEMORY function
The MEMORY function can be used to preset a maximum of 5 radio stations.
● To switch on the radio, press the RADIO/SLEEP button (13) once.
● Press the arrow buttons (up and down) (14) to select a radio station.
● Press and hold the MEMORY button (15) until the display (11) shows
MEM and 01 ashes.
● Press the MEMORY button (15) again to save the radio station.
● Repeat the last 3 steps to preset another radio station.
● To edit a preset radio station, press the arrow buttons (up and down) (14)
to select a preset radio station. Repeat the previous steps to save the
radio station.
● To listen to a preset radio station, press the MEMORY button (15) to
select a preset radio station while the radio is switched on.
To Next Page
Loading...
Need help?
General
