Akai AR270P

10
Using the SLEEP function5.3
● To activate the SLEEP function, press the RADIO/SLEEP button (13)
twice. The SLEEP indicator (20) comes on. The display (11) shows 5 and
ashes.
● To set the sleep timer (10/15/30/45/60/75/90), press and hold the
RADIO/SLEEP button (13).
The appliance stops playing after the chosen time has elapsed.
● To check the remaining time, press the RADIO/SLEEP button (13).
● To cancel the SLEEP function, press the SNOOZE/DIMMER button (6).
Alarm function5.4
This function is available in radio and tone mode. Two time slots are
available (ALM 1 and ALM 2).
● Choose the alarm mode (radio or tone).
● To set the alarm:
- Press the alarm button (7/8) once to view the time.
- Press the alarm button (7/8) twice to wake up by radio.
The corresponding icon appears in the display (11).
- Press the alarm button (7/8) thrice to wake up by tone.
The corresponding icon appears in the display (11).
● For radio alarm:
- Switch on the radio.
- Select the desired radio station.
- Adjust the volume.
Snooze alarm
The default snooze time is: 9 minutes.
● To snooze the alarm, press the SNOOZE/DIMMER button (6) while the
alarm sounds. The alarm sounds again after the snooze time has elapsed.
● To stop the alarm, press the alarm button (7/8) while the alarm sounds.
The alarm is automatically set for the next day.