GB 16
Presetting Stations In The Tuner Memory
You can store up to 40 of your favourite stations (30 FM / 10 MW) in the tuner memory for
easy recall at any time.
Example “03”.
Example “03”.
1.) Press the PROGRAM/CLOCK button on the remote
control. The display shows “PRG” and the channel
number “01” indicator flashes.
Press the PROGRAM/CLOCK button again,
the “03” stops flashing confirming that your
station has been entered in preset channel
number “03”.
Press the ALBUM/EME CH. + or - buttons
select your next preset memory number.
Press the PROGRAM/CLOCK button again to enter your station in preset channel
number.
2.) Press the ALBUM/EME CH. + or - buttons to
select your preset memory number.
3.) Tune to the next station you wish to memorise
Example: FM 106.70 MHz
4.) Repeat Step 3 until you have stored up to 30 stations on the FM band, then press the
BAND button to switch to the MW band and follow the same procedure to enter up to
10 MW stations in the tuner memory.
Using either the manual or automatic tuning method described on page 13, tune to the first
station you wish to memorize (Example: FM 103.50 MHz) and then:
To Next Page
Loading...