GB 22
5.) Repeat steps 3 and 4 selecting the desired Track number
each time until you have entered
up to 64 tracks in the
CD program memory.
4.) Press the PROGRAM/CLOCK button again to enter
Track 07 in program memory #1.
2.) Press the PROGRAM/CLOCK button on the remote control.
1.) Load the disc in the player and wait until the player has read the disc.
The Programmed Playback feature allows you to program a total of up to 64 tracks in any
desired order. You may program the same track to play several times within a program
sequence if desired.
Note: You cannot program tracks during playback. If a disc is playing press the STOP
button first to stop playback before beginning the programming steps below.
3.) Press the SKIP/TUNING or buttons to select
the first track on the disc to be programmed.
(Example: Track 07).
The program memory number advances to “P-02”.
Programmed Playback
The PRG indicator, Program Memory “P- 01” and
Track “00” will appear in the display.
To Next Page
Loading...