GB 18
5.) Close the CD door.
8.) Playback will continue until all tracks on the disc have been played, then the player stops
and the display shows the total tracks number and playing time on the disc.
7.) Adjust the VOLUME, DBBS and EQ controls as desired.
9.) If you are finished listening, press and open the CD door, remove your disc from the
player, re-close the CD door and press the STANDBY/ON button to return the system to
the Standby (Off) mode.
6.) Press the PLAY/PAUSE button to begin playback.
The display will show flashing “READ” as the player
reads the disc.
After reading the disc the display will show the total
tracks and playing time.
To stop playback at any time, press the STOP button.
You may turn the “ESP” function “Off” or “On” by pressing
the ST/ESP/ID3/FIND button on the remote control.
“ESP” meaning is Electronic Stability Program.
Note:
The reading time may be even longer if you are using CD-RW (rewritable) discs.
This is normal and not an indication of any problem with your unit.
To Next Page
Loading...