14: Synchronization
Page 125
RS422 FULL SLAVE Setup
To setup the system:
1) Connections:
2) Press the SUB-MENU key.
The indicator in the key will flash and the text “SUB-MENU” will appear on the display.
3) Press the SYNC(SYNC) key.
You will see a display similar to the following:
4) Use the JOG/SHUTTLE control to select the “RS422-MC” (Machine Control) menu.
5) Press the STORE/ENT key.
6) Use the JOG/SHUTTLE control to select “FULL SLAVE” mode.
7) Press the STORE/ENT key.
ABS
S-M
VTR Slave
TX 2 7
RS-422
DR16pro Slave
VIDEO EDITOR Master
TX 3 8
RX 3 8
TX 2 7
RS-422
RX 3 8
RX 2 7
TX 3 8
RX 2 7
To Next Page
Loading...