Akai EWI Series User Manual

33
Using the BACK WARD Button
The BACKWARD button comes in extremely handy when creating
sounds. When it is pressed while a certain parameter is being edited,
the display returns to the previous parameter. The parameter changes
back each time the button is pressed.
Variations in Sounds Using the
^^Cp ON Settiiig
Ex.:
VCF-EG RELES: 2 5
The two VCOs in the EWV2000 can be operated synchronously. This
function makes it possible to create a variety of sound source wave
forms. The "OSC-1" parameters include a "SYNCHRONIZE"
parameter. Turn this on.
Parameter being edited
Ex.:
YNCHRONIZE :OFF
BACK
WARD
SYNCHRONIZE : ON
VCF-EG SUSTN: 9/
Set the VCF and VCA levels etc. so that the source 1 and source 2
sounds are produced simultaneously. Next play with different wave
forms set for OSC-1 and OSC-2. You should be able to discover a lot
of different sounds. In particular, controlling the VCO pulse widths
provides even greater variations.
This synchronized operation is quite effective. Try changing the
OSC-2 "FREQ" parameter - the OSC-l pitch will change simultan,
ously. Also control the OSC-2 "OSC-EG DEPTH" parameter so th_
you understand the effect. The "EG" parameters for the VCFs are
used for the "OSC-EG" parameters for the VCOs.
BACK
WARD
VCF-EG DECAY: 4 2
BACK
WARD
Scan by Manual Manor
http://www.markglinsky.com/ManualManor.html

Akai EWI Series Specifications

General

Type	Electronic Wind Instrument
Connectivity	USB, MIDI
Power	Battery
Controls	Breath sensor, octave rollers
Sound Engine	Built-in sound engine
Polyphony	128 voices
Sensors	Breath, bite, finger
Power Source	Batteries