Akai EWI Solo Quick Start Guide

9
Restoring Default Settings
To return all of the EWI Solo's settings to its factory defaults:
1. Disconnect the EWI Solo from your computer.
2. Power off the EWI Solo by pressing and holding the Power button for a full second and then
releasing it.
3. Press and hold the Program button, FX button, and Hold button.
4. Power on the EWI Solo by pressing and holding the Power button for a full second.
5. Release all buttons.
6. When powered on, the display will show a menu with the following options. Use the encoder
to select and option and then press it to select.
• Continue Normally: Select this option to power on EWI Solo normally.
• Reset GLOBAL Only: Select this option to reset only the Global settings to factory
defaults.
• Reset Everything: Select this option to reset all settings to factory defaults.
If no selection is made after a few seconds, EWI Solo will power on normally.
Important: Restoring default settings cannot be undone.

Akai EWI Solo Specifications

General

Brand	Akai
Model	EWI Solo
Category	Musical Instrument
Language	English