Akai GX-285D User Manual

OPERA TING PRECAUTIONS
The co ndition s listed below do not ind icate mechanical
failure of
your unit. If your machine exhibits any of the
following, please check for trouble as indicated.
Loss
of sensitivity or tone quality
* When using tapes recorded with the Dolby process, it is
imperative that the Dolby Noise Reduction Switch be
set to ON position during playba ck.
* A.C. power voltage lower than the voltage to which
your mahcine is ad justed .
* Magnetized heads. See Head Demagnet izing procedure.
* Wrong side of tape facing the heads.
* Defective or worn tape .
Machine will
not operate
* Check posi tion s of controls, input -and output connec-
tions and plugs.
* Incorre ct tape loading. Refer to Tape Loading.
* Machine is set to automatic stop or auto matie shut-off,
or to pause mode.
Irregularity of tape transport
* Oil adhering to Capstan. Refer to Pinch Wheel and
Capstan Cleaning.
* S ticky or dirty tape surface.
* Bent reel s.
*
Incorre ct tape loading.
DIRECT FUNCTION CHANGE CONTROL
Your unit features a completely automatic function change
system for easy and speedy changing of operating modes. It
is not necessary to depress the Stop Button before changing
modes .
REMOTE CONTROL
All operating functions of the GX-285D can be remote
controlled by using Akai Remote Control Unit RC-I·6
option al accessory. Plugs into Remote Control Socket at
rear
of recorder.
Will no t reverse pla y
* Sensing foil affixed improperly.
The following notes are provided for your convenience .
* Place your unit on a fiat horizontal surface and operate
in either horizontal or vertical position. Do not set
anything on top of the unit which will obstruct the
ventilator.
* The front panel of your machine may become rather
warm during operation, but this is normal.
* Your machine requires constant voltage for optimum
performance.
* If the sound sources are so far away from the
microphones that the microphone recording level
controls must be turned to maximum, sorne hum or
noise will inevitably
be recorded. A test recording is
recommended before attempting a final recording.
Should there be a problem with your machine , write down
the model and seriai numbers and ail pertinent data
regarding warrant y coverage as well as a clear description of
the existing trouble and contact your nearest authorized
Akai Service Station or the Service Department of Akai
Company, Tokyo, Japan.

Akai GX-285D Specifications

General

Brand	Akai
Model	GX-285D
Category	Tape Deck
Language	English