Akai GXC-704D

MUTE LEAF SWITCH
Fig.9 Mute Switch Adjustment
TAPE SPEED
ADJUSTMENT SCREW
MOTOR
MHI-5R2CHA
(a) Except JPN Model
. MUTE SWITCH ADJUSTMENT
(Refer to Fig. 9)
When in the playback mode, the space should be
0.5 to 1mm as in Fig.9. To adjust, turn the leaf
switch screw.
. MOTOR SWITCH ADJUSTMENT
(Refer to Fig. 10)
When in the Stop position, the space between the
upper part of the Brake Slide switch and the lower
part of the Motor leaf switch should be 0.5 +0.5/-0
mm.
To adjust, loosen the leaf switch screw and move the
leaf switch.
BRAKE SLIDE (B)
MOTOR SWITCH
Fig. 10 Motor Switch Adjustment
TAPE SPEED
ADJUSTMENT SCREW
MOTOR
M38E -!ISCL
(b) JPN Model
Fig. 11 Tape Speed Adjustment
. TAPE SPEED ADJUSTMENT
Connect the Frequency Counter to the line output
terminals. Playback a 1,000Hz pre-recorded test
tape and adjust tape speed adjustment screw to
obtain a tape speed of 1,000 Hz +1%.
(CS-703D: 1,000 Hz +2%)