Akai HX-R40 - Page 6

SPECIFICATIONS
TRACK SYSTEM
4 track 2 channel stereo
TAPE Phillips type cassette
HEADS HD head for recording and playback x 1
Erase head x 1
MOTORS Electronically speed controlled DC motor for capstan drive x 1
DC motor for reel drive x |
DC motor for cam drive x 1
WOW & FLUTTER
FOR J-MODEL
0.05% WRMS (JIS), 0.12% (DIN)
+0.07% W. Peak (EIAJ), 0.05% WRMS
FREQUENCY RESPONSE
NORMAL
CrO,
METAL
20 Hz to 17,000 Hz + 3 dB
20 Hz to 18,000 Hz + 3 dB
20 Hz to 19,000 Hz + 3 dB
S/N (METAL)
FOR J-MODEL
DOLBY B TYPE NR SWITCH ON
DOLBY C TYPE NR SWITCH ON
59 dB
58 dB (EIAJ)
Improves up to 5 dB at 1 kHz, 10 dB above 5 kHz
Improves up to 15 dB at 500 Hz, 20 dB at 1 kHz to 10 kHz
HARMONIC DISTORTION (METAL)
FOR J-MODEL
Less than 0.8%
0.8% (EIAJ)
INPUT SENSITIVITY/IMPEDANCE
MIC
LINE
OUTPUT SENSITIVITY/IMPEDANCE
LINE
HEADPHONES
0.25 mV/5 kohms (Required microphone impedance 600 ohms)
70 mV/47 kohms
388 mV/2 kohms
0.3 mW (8 ohms)/82 ohms
POWER REQUIREMENTS
120V, 60 Hz for USA & Canada
220V, 50 Hz for Europe except UK
240V, 50 Hz for UK & Australia
110V/120V/220V/240V, 50 Hz/60 Hz
convertible for other countries
POWER CONSUMPTION 17W
FOR J-MODEL 14W
DIMENSIONS 440 (W) x 110 (H) x 250 (D) mm
(17.3 x 4.3 x 9.8 inches)
WEIGHT 4.3 kg (9.5 Ibs)
* For improvement purposes, specifications and design are subject to change without notice.
$e SERVICE MANUAL
4