23
TROUBLE SHOOTING (Cont’d)
No sound - when audio
is connected to a home
stereo.
• Source Selection on your stereo
is not set properly
• Improper Connection to stereo
system
• RCA cords are not connected
securely.
• Select AUX IN as the source for
your home stereo
• Follow direction on “Making the
for Connections” for connecting to
a home stereo system
• Ensure white and red RCA
cords are securely inserted into
both the karaoke system and the
home stereo system
No song lyrics appear on
the TV screen
• Video cable is not connected
properly to the TV
• Source selector on TV is not set
to VIDEO
• TV does not have video line
input
• A CDG is loaded but the CD+G
icon is not lit
• Connect the video cable to the
karaoke system’s VIDEO OUT
and to the TV VIDEO IN.
• Using your TV remote to select
VIDEO input or select the proper
VIDEO input on the TV itself.
• Connect from VIDEO OUT of
the system to the VIDEO IN on
your VCR/Home theater. Refer to
“Making the Connections. Check
the disc to be sure it is a CD+G.
• Check the disc to be sure it is
clean.
No sound from mic • Mic volume control is set to
minimum
• Mic is off
• Adjust mic volume to max, and
No Video is displayed on the TFT
Screen.
•
•
Set Screen button to turn ON.
Ensure you are playing a CD+
Graphics or CD+G Karaoke disc .
•
•
The TFT Screen is turned OFF.
The disc being played is a regular
music CD,in which case no image
will be displayed.
then re-adjust to a comfortable
level
• Turn on mic with the ON/OFF
switch located on the microphone
PROBLEM POSSIBLE CAUSE SOLUTION
To Next Page
Loading...
