Akai MPK225

9
To name or rename a Preset:
1. Press Preset to enter Preset Mode.
2. Press the Right Cursor button so Store Program appears in the display.
3. Press the Down Cursor button to select the Name field. The first letter of the name will
blink.
4. Turn the Value Dial to change the blinking character, and use the Left Cursor and Right
Cursor buttons to move between the characters.
5. To save the Preset name when you are finished, press the Value Dial.
To cancel the operation, press Preset.
To restore the factory default Presets:
1. Press Preset to enter Preset Mode.
2. Press the Left Cursor button so Factory Settings appears in the display.
3. Turn the Value Dial and select Presets.
4. To restore MPK225's factory default Presets (which overwrites those you have saved),
press the Value Dial.
To cancel the operation, press Preset.